MarcoAntonioMateosSanchez (User)
Posts: 18
|
| Lost Ip on every restart 2008/11/29 08:08 |
|
|
I've several machines with Virtualmin.
On one with Debian 4.0 and VMPro on every restart the machine lost the config for 2 IP.
Machine has 4 IP.
eth0, eth0:1, eth0:2 y eth0:3
The interfaces eth0:2 and eth0:3 lost on every restart.
I'm lost with this problem.
Any help ?
Apreciate
|
|
|
|
The administrator has disabled public write access. |
andreychek (Moderator)
Posts: 857
|
| Re:Lost Ip on every restart 2008/11/29 08:21 |
|
|
Howdy,
When you set the IP address for eth0:2 and eth0:3, how are you doing that? What steps do you use to set the IP addresses?
-Eric
|
|
|
|
The administrator has disabled public write access. |
MarcoAntonioMateosSanchez (User)
Posts: 18
|
| Re:Lost Ip on every restart 2008/11/29 08:29 |
|
|
Goto Webmin -> Networking -> Network Configuration
Click on eth0, and after click on Add virtual interface
|
|
|
|
The administrator has disabled public write access. |
andreychek (Moderator)
Posts: 857
|
| Re:Lost Ip on every restart 2008/11/29 08:39 |
|
|
Okay, cool.
Whenever you look on the Network Configuration page, there are two tabs -- Active Now, and Activated on Boot.
After you add the interface, go into Activated on Boot, and verify that the "Activate at boot?" field is set to "Yes".
-Eric
|
|
|
|
The administrator has disabled public write access. |
MarcoAntonioMateosSanchez (User)
Posts: 18
|
| Re:Lost Ip on every restart 2008/11/29 08:52 |
|
|
Ooopsss...
I'm stupid.
I dont see this... and every time put only at Activate now and now on Activate at boot...
Sorry and thanks
|
|
|
|
The administrator has disabled public write access. |
|
