Not sure how to proceed. Please advise, thanks!
[root@main ~]# bash install.sh -v
Welcome to the Virtualmin GPL installer, version 6.0.6
This script must be run on a freshly installed supported OS. It does not
perform updates or upgrades (use your system package manager) or license
changes (use the "virtualmin change-license" command).
The systems currently supported by install.sh are:
CentOS/RHEL Linux 6 and 7 on x86_64
Debian 7, 8, and 9, on i386 and amd64
Ubuntu 14.04 LTS and 16.04 LTS, on i386 and amd64
If your OS/version/arch is not listed, installation will fail. More
details about the systems supported by the script can be found here:
http://www.virtualmin.com/os-support
The selected package bundle is LAMP and the size of install is
full. It will require up to 650 MB of disk space.
Exit and re-run this script with --help flag to see available options.
Continue? (y/n) y
WARNING
Virtualmin may already be installed. This can happen if an installation failed,
and can be ignored in that case.
But, if Virtualmin has already successfully installed you should not run this
script again! It will cause breakage to your existing configuration.
Updates and upgrades can be performed from within Virtualmin. To change
license details, use the 'virtualmin change-license' command.
Changing the license never requires re-installation.
Really Continue? (y/n) y
[DEBUG] Memory is greater than 1024GB, which should be sufficient.
[INFO] Started installation log in /root/virtualmin-install.log
[DEBUG] Phase 1 of 3: Setup
▣□□ Phase 1 of 3: Setup
[DEBUG] Install mode: full
[DEBUG] Product: Virtualmin GPL
[DEBUG] install.sh version: 6.0.6
[DEBUG] Checking for fully qualified hostname...
[DEBUG] Hostname OK: fully qualified as main.eggycrew.com
[DEBUG] Installing serial number and license key into /etc/virtualmin-license
[DEBUG] Operating system name: CentOS
[DEBUG] Operating system version: 7.3.1611
[DEBUG] Operating system type: centos
[DEBUG] Operating system major: 7
[DEBUG] Configuring package manager for CentOS 7.3.1611...
[DEBUG] Disabling SELinux during installation...
/usr/sbin/setenforce: SELinux is disabled
[WARNING] setenforce 0 failed: 1
Updating yum Groups [ ✔ ]
Downloading virtualmin-release-latest.noarch.rpm [ ✔ ]
Installing virtualmin-release package [ ✔ ]
[DEBUG] Phase 2 of 3: Installation
▣▣□ Phase 2 of 3: Installation
Downloading epel-release-latest-7.noarch.rpm [ ✔ ]
Installing EPEL release package [ ✔ ]
Installing yum-utils [ ✔ ]
Enabling extras repository [ ✔ ]
Installing scl-utils [ ✔ ]
Install Software Collections release package [ ✔ ]
Installing PHP7 [ERROR] Failed with error: 1
[ ✘ ]
[ERROR] Something went wrong. Exiting.
[ERROR] The last few log entries were:
Loading mirror speeds from cached hostfile
* base: yum.tamu.edu
* epel: mirror.oss.ou.edu
* extras: pubmirrors.dal.corespace.com
* updates: mirror.5ninesolutions.com
Package centos-release-scl-2-2.el7.centos.noarch already installed and latest version
Nothing to do
Install Software Collections release package: Success.
Spin pid is: 4268
Warning: group Software Collections PHP 7 Environment does not exist.
Maybe run: yum groups mark install (see man yum)
Error: No packages in any requested group available to install or update
Installing PHP7: [2017-09-12 10:20:11 CDT] [ERROR] Failed with error: 1
[2017-09-12 10:20:11 CDT] [ERROR] Something went wrong. Exiting.
[2017-09-12 10:20:11 CDT] [ERROR] The last few log entries were:
[root@main ~]# yum grouplist
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
* base: yum.tamu.edu
* epel: mirror.oss.ou.edu
* extras: pubmirrors.dal.corespace.com
* updates: mirror.5ninesolutions.com
Available Environment Groups:
Minimal Install
Compute Node
Infrastructure Server
File and Print Server
MATE Desktop
Basic Web Server
Virtualization Host
Server with GUI
GNOME Desktop
KDE Plasma Workspaces
Development and Creative Workstation
Installed Groups:
Milkymist
Security Tools
System Administration Tools
Available Groups:
CIFS file server
Compatibility Libraries
Console Internet Tools
Desktop
Desktop Platform
Desktop Platform Development
Development Tools
Eclipse
Educational Software
Electronic Lab
FCoE Storage Client
Fedora Packager
General Purpose Desktop
Graphical Administration Tools
Haskell
Legacy UNIX Compatibility
Messaging Client Support
Messaging Server Support
MySQL Database client
MySQL Database server
NFS file server
Network Storage Server
SNMP Support
Scientific Support
Server Platform
Server Platform Development
Smart Card Support
Storage Availability Tools
System Management
TeX support
TurboGears application framework
Virtualization
Web-Based Enterprise Management
Xfce
iSCSI Storage Client
Done
[root@main ~]# yum repolist
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
* base: yum.tamu.edu
* epel: mirror.rnet.missouri.edu
* extras: pubmirrors.dal.corespace.com
* updates: mirror.5ninesolutions.com
repo id repo name status
base/7/x86_64 CentOS-7 - Base 9,363
centos-sclo-rh/x86_64 CentOS-7 - SCLo rh 6,056
centos-sclo-sclo/x86_64 CentOS-7 - SCLo sclo 467
epel/x86_64 Extra Packages for Enterprise Linux 7 - x86_64 11,898
extras/7/x86_64 CentOS-7 - Extras 451
updates/7/x86_64 CentOS-7 - Updates 2,146
virtualmin/7/x86_64 RHEL/CentOS 7 - x86_64 - Virtualmin 87
virtualmin-universal Virtualmin Distribution Neutral Packages 60
repolist: 30,528
[root@main ~]#
Just to follow up on this, there was a ticket about it, and it got resolved by running it under sh instead of bash. (Though, this shouldn't have caused it to fail... I was unable to reproduce the problem running it under bash on my test CentOS 7 system. The error indicates groups aren't available, which probably indicates the Virtualmin repos didn't get setup, which I guess means something in the install script or its shell library of functions failed to download virtualmin-release package. Still not sure why/how bash would break that, but I guess it does in some circumstances.)
--
Check out the forum guidelines!
Joe if you're testing take please also a look at CentOS 7.4 https://www.mail-archive.com/centos-announce@centos.org/msg10523.html
I don't expect any problems with 7.4. It should already be supported. Let me know if you run into any issues.
--
Check out the forum guidelines!
The selected package bundle is LAMP and the size of install is full. It will require up to 650 MB of disk space.
Exit and re-run this script with --help flag to see available options.
Continue? (y/n) y [INFO] Started installation log in /root/virtualmin-install.log
▣□□ Phase 1 of 3: Setup Downloading virtualmin-release-latest.noarch.rpm [ OK! ] Installing virtualmin-release package [ OK! ]
▣▣□ Phase 2 of 3: Installation Downloading epel-release-latest-6.noarch.rpm [==>--] [ERROR] [ERROR] Something went wrong with the previous command. Exiting. ./scr: line 8: postconf: command not found ./scr: line 9: postconf: command not found ./scr: line 10: postconf: command not found ./scr: line 11: postconf: command not found ./scr: line 12: postconf: command not found postfix: unrecognized service [root@vps ~]#
Tell me about this issue
Howdy,
Hmm, that makes it appear that Postfix either wasn't installed, or it isn't able to find some of the commands installed with it.
Can you attach your /root/virtualmin-install.log file?
Also, what is the output of these commands:
dpkg -l postfixfind /usr -name postconf
This is the logs of /root/virtualmin-install.log
Checking for Perl...found Perl at /usr/bin/perlChecking for HTTP client...found /usr/bin/curl -f -s -L -O
[2017-10-02 12:23:53 EDT] [DEBUG] Memory is greater than 1024 MB, which should be sufficient.
[2017-10-02 12:23:53 EDT] [INFO] Started installation log in /root/virtualmin-install.log
[2017-10-02 12:23:53 EDT] [DEBUG] Phase 1 of 3: Setup
[2017-10-02 12:23:53 EDT] [DEBUG] Install mode: full
[2017-10-02 12:23:53 EDT] [DEBUG] Product: Virtualmin GPL
[2017-10-02 12:23:53 EDT] [DEBUG] install.sh version: 6.0.7
[2017-10-02 12:23:53 EDT] [DEBUG] Checking for fully qualified hostname...
[2017-10-02 12:23:53 EDT] [DEBUG] Hostname OK: fully qualified as vps.myget.asia
[2017-10-02 12:23:53 EDT] [DEBUG] Installing serial number and license key into /etc/virtualmin-license
[2017-10-02 12:23:53 EDT] [DEBUG] Operating system name: CentOS
[2017-10-02 12:23:53 EDT] [DEBUG] Operating system version: 6.0
[2017-10-02 12:23:53 EDT] [DEBUG] Operating system type: centos
[2017-10-02 12:23:53 EDT] [DEBUG] Operating system major: 6
[2017-10-02 12:23:53 EDT] [DEBUG] Configuring package manager for CentOS 6.0...
Spin pid is: 643
Downloading virtualmin-release-latest.noarch.rpm: Success.
Spin pid is: 668
@
"virtualmin-install.log" 25L, 1594C
output of this dpkg -l postfix find /usr -name postconf
Downloading epel-release-latest-6.noarch.rpm [==>--]
[ERROR]
[ERROR] Something went wrong with the previous command. Exiting.
./scr: line 8: postconf: command not found
./scr: line 9: postconf: command not found
./scr: line 10: postconf: command not found
./scr: line 11: postconf: command not found
./scr: line 12: postconf: command not found
postfix: unrecognized service
[root@vps ~]# dpkg -l postfix
-bash: dpkg: command not found
[root@vps ~]# find /usr -name postconf
*********************
Please don't revive old unrelated threads with new questions. Your problem is completely different from the original subject of this thread. Always start a new topic for new problems.
Is your OS really CentOS 6.0 (not 6.9)? That's not supported. You need to update to at least a recent release of CentOS 6, though CentOS 7 would be even better. So, update your system fully before trying to install Virtualmin.
--
Check out the forum guidelines!